JailBreak iPod Touch 4G/3G/2G iOS 4.2.1Win and iPad iOS 4.3.3 Mac

JailBreak iPod Touch 4G/3G/2G iOS 4.2.1Win and iPad iOS 4.3.3 Mac

Apple iPod Touch 4G was Jailbroken the next day it started shipping. A new bootrom exploit was found which has been named SHAtter. It enables Hackers to bring tools which will tether jailbreak iPod Touch 4G for the rest of its current hardware cycle.

Jailbreaking is a real "Thriller" and it adds very much functionality to your iPod. It is also very unlikely that anything will go wrong and if it does you can easily fix it with Cydia free tool.


iPod Touch 4G Jailbreak Benefits and Advantages

The most prominent benefit in case of iPod Touch 4G is that you can install a bunch of USEFUL apps which are not officially supported by Apple because of its extreme unfriendly control over App Store. Furthermore, it is no longer illegal to jailbreak iPod Touch 4G as DMCA has made it legal but it may still void your warranty which is a rare chance.

iPod Touch 4G Jailbreak Disadvantages and Risk Factor

There are lot of people curious about the disadvantages or risks involved in jailbreaking the iPhone or iPod Touch, before they actually decide to do that.

Well, there is a very very slim chance that you can brick your iPhone or iPod Touch. Which basically means rendering it unresponsive. But those are usually fixed by doing a reset (press and hold the home and sleep buttons at the same time). You can then reinstall the firmware and try again.

Doing the research might set you back 20 minutes or so and the whole process might take another 15 minutes. If you ever take it back to Apple for warranty, you probably don’t want them to see that you’ve jailbroken it so you might spend another 10 minutes doing a firmware restore through iTunes to set your iPhone or iPod Touch back to its original settings.

JailBreak iPod Touch 4G for Microsoft Windows Users with Redsn0w Pwnage Tools

Redsn0w 0.9.6b4 is a popular jailbreaking tool developed and release by the iPhone Dev Team. It allows iPod Touch users to jailbreak iOS 4.2.1.

Please follow these step by step procedure to jailbreak iPod Touch 4G, iPod Touch 3G and iPod Touch 2G on iOS 4.2.1 using Redsn0w. But here are some important points to note before you proceed.
  • This scope of this tutorial is for Microsoft Windows Platform only.
  • This tutorial is targeted for Apple iPod Touch 4G, iPod Touch 3G, iPod Touch 2G non-MC model.
  • Jailbreaking iPod Touch voids the user warranty, so proceed with caution and at your own risk.
  • Please backup your iPod Touch Data before proceeding to Jailbreak.
  • Once Jailbreaking process is complete, take measures to to keep your iPod/iPhone secure.
  • Please make sure you are running at least iTunes 10.1 or any latest version of iTunes.
  • Redsn0w 0.9.6b4 can NOT Jailbreak iOS 4.2.1 for iPod Touch MC model
  • Redsn0w 0.9.6b4 can only perform a Tethered Jailbreak on iPod Touch 4G and iPod Touch 3G.
Tethered Jailbreak means that thejailbreak needs to be reapplied every time you power down your iPodtouch. If you let the battery run out or restart your iPod touch thenyou will need to reapply the jailbreak by connecting to your computer. iPhone Dev Team has recently released Redsn0w 0.9.7 that will perform an untethered jailbreak on iPod Touch 4G on iOS 4.2.1 but it is currently not ready for the general public.
Now, please follow these step-by-step instructions to Jailbreak iPod Touch 4G, 3G 2G on iOS 4.2.1:
  • Step 1: Download Redsn0w 0.9.6b4 by clicking here and save the application in a folder named “Pwnage” on your desktop.
  • Step 2: You need to download iOS 4.2.1 firmware file:
    iOS 4.2.1 firmware file for iPod Touch 2G users (iPod2,1_4.2.1_8C148_Restore.ipsw)
    iOS 4.2.1 firmware file for iPod Touch 3G users (iPod3,1_4.2.1_8C148_Restore.ipsw)
    iOS 4.2.1 firmware file for iPod Touch 4G users (iPod4,1_4.2.1_8C148_Restore.ipsw)
  • Step 3: Double click the Redsn0w zip file and extract the application to the Pwnage folder.
  • Step 4: Connect your iPod Touch to the computer, which should automatically launch iTunes.
  • Step 5: From the 'Devices' section on the left pane of iTunes, select your iPod Touch device. Now, hold down the Shift button and click the 'Restore' button.Jailbreak iOS 4.2.1 - Redsn0w
  • Step 6: Navigate to the Pwnage folder on the desktopand select the downloaded iOS 4.2.1 firmware file (iPod Touch 4G users:iPod4,1_4.2.1_8C148_Restore.ipsw, iPod Touch 3G users:iPod3,1_4.2.1_8C148_Restore.ipsw, iPod Touch 2G users:iPod2,1_4.2.1_8C148_Restore.ipsw). Click on the 'Choose' button to let iTunes update your iPhone with the required firmware.
  • Step 7: Navigate back to the Pwnage folder and launch the Redsn0w application.
  • Step 8: You will be asked to select thecorresponding IPSW file. Click on the Browse button and select the iOS4.2.1 firmware file (iPod Touch 4G users:iPod4,1_4.2.1_8C148_Restore.ipsw, iPod Touch 3G users:iPod3,1_4.2.1_8C148_Restore.ipsw, iPod Touch 2G users:iPod2,1_4.2.1_8C148_Restore.ipsw).Jailbreak iOS 4.2.1 - Redsn0w
  • Step 9: Redsn0w will verify the firmware file and inform you if it has successfully identified it. Click on 'Next' to proceed.
    Jailbreak iOS 4.2.1 - Redsn0w
  • Step 10: Redsn0w will now start preparing the jailbreak data.Jailbreak iOS 4.2.1 - Redsn0w
  • Step 11: You will now be prompted to select thejailbreak options you would like. A few of these may have already beenselected by default. Make sure Cydia is selected and select 'Next' to continue.Jailbreak iOS 4.2.1 - Redsn0w
  • Step 12: You will now be prompted to switch OFF your iPod Touch and plug it to the computer. Follow the instructions and click on 'Next' to move to the next screen:Jailbreak iOS 4.2.1 - Redsn0w
  • Step 13: You will now need to put your iPod Touch into the DFU mode. Redsn0w will take you through the necessary steps:
    (a) Hold the Power button on iPod Touch down for 3 seconds:Jailbreak iOS 4.2.1 - Redsn0w
    (b) Now simultaneously hold the iPod Touch and keep the two buttons pressed for 10 seconds:Jailbreak iOS 4.2.1 - Redsn0w
    (c) Now release the Power button while keeping the Home button pressed until Redsn0w identifies the device:
    Jailbreak iOS 4.2.1 - Redsn0w
  • Step 14: Your iPod Touch should reboot now.Jailbreak iOS 4.2.1 - Redsn0w
  • Step 15: Redsn0w will now begin uploading the new RAM disk and kernel.Jailbreak iOS 4.2.1 - Redsn0w
  • Step 16: You will now be notified once the jailbreaking process is complete. Click on the 'Finish' button to exit the application.
    Jailbreak iOS 4.2.1 - Redsn0w
  • Step 17: Your iPod Touch will reboot once again(which could take approximately 5 minutes). After it has rebooted, youriPod Touch should be successfully jailbroken. You should find Cydia jailbreak app on your iPod Touch’s home screen.
    Jailbreak iOS 4.2.1 - Redsn0w
Important Note:iPod Touch 4G and iPod Touch 3G users should select Just boot tethered right now from the options window and click Next to use Redsn0w to help you boot back into your jailbroken device on every reboot.

JailBreak iPod Touch 4G for Apple Mac Users with Redsn0w Pwnage Tools

For Apple Mac users, iPhone Dev Team has released PwnageTool 4.3.3 for Mac an Untethered Jailbreak Tool for iOS 4.3.3. PwnageTool 4.3.3 for Mac can be downloaded here:

Unfortunately, the current version of PwnageTool does not support iPad 2 yet. Please follow these step by step procedure to jailbreak iPod Touch 4G, iPod Touch3G & iPadusing PwnageTool 4.3.3:
  • Step 1: Download the required files which are posted at the bottom of the post.
  • Step 2: Launch PwnageTool 4.3.3
  • Step 3: Click on Expert Mode, select your device and click on Next
  • Step 4:Now, click on Browse and navigate it to the downloaded ipsw file and click Open.
  • Step 5:Now, Click on General and click Nextand Follow the on screen instructions
  • Step 6: Now, Cydia Settings. - Select Packages and make sure Cydia Package is selected. Then click Next
  • Step 7: Now, click on Build and click on Next. It will ask you where to save the custom firmware. Save it on your desktop
  • Step 8: After a minute or so, you will be asked topromptyour admin password. Once your custom firmware is created youwillget this message “ihaz Success”. Now, it will ask you to putyouriOS device in DFU mode – It is very important that you put your device in DFU via PwnageTool.
  • Step 9: Now, Connect your iOS Device to the computer and follow the below instructions to place your iOS Device in DFU mode.
    1. Power off your iOS Device
    2. Hold both the power and home button together for exactly 10 seconds.
    3. Now, release the power buttom but, keep holding the home bottom for 15 to 20 sec / may be till iTunes recognize your iOS Device. (On DFU mode, you wouldn’t see any icons on the screen. It will be blank on the screen)
  • Step 10: Once your iOS Device in DFU, launch iTunes HOLD down the Option Key and click Restore.
  • Step 11: Now, navigate to the custom firmware you just created and click Open.
  • Step 12: Now, just sit & relax. iTunes will take care of the rest.
After Jailbreak Done - Please Launch Cydia and apply all the available upgrades and allow it to reload the data.
Very Important - Once the process is done, please make sure to save your SHSH Blob using TinyUmbrella / iSHSHit
Author:
iTechWhiz
3:24 PM

1 comment:

Comments which are abusive, offensive, contain profanity, or spam links will be discarded as per our Comments Policy.

Copyright © 2011-2020 iTechWhiz.com powered by Google
Powered by Blogger.